POLYASPARTIC COATINGS

Polyaspartic coatings offer many of the benefits of epoxy coatings, with the added advantage of rapid curing times and UV resistance. At Epoxy Experts, we provide flake, solid, and metallic polyaspartic coatings that are suitable for a variety of residential, commercial, and industrial applications.

How Polyaspartic Curing Works

Polyaspartic is a type of polyurea, and the resin reacts and hardens far faster than epoxy. A floor that would take an epoxy system two to three days to cure enough for foot traffic can be ready in a single day with polyaspartic, and most of our polyaspartic jobs are back in use within 24 hours. That speed comes from the chemistry rather than any shortcut in prep, so we still grind the concrete, repair cracks, and check moisture before the first coat goes down. The fast cure also means we can install a full flake system in one visit, broadcasting the chips into the base coat and locking them in with a clear topcoat the same day.

Polyaspartic Coatings in Vancouver’s Climate

Vancouver throws a lot of moisture and temperature swings at a floor, and polyaspartic handles both better than most coatings. It stays flexible as the slab expands and contracts through wet winters and warmer summers, which keeps the surface from cracking along with the concrete underneath. We can also install polyaspartic in colder conditions that would stall an epoxy cure, so unheated garages and parkades stay on schedule through the fall and winter. The UV stability matters here too, since south facing garages and patios that get direct light will not yellow the way a standard epoxy topcoat can.

Polyaspartic or Epoxy for Your Floor

Both systems give you a hard, sealed, easy to clean surface, and the right choice usually comes down to timing and where the floor is. Epoxy builds a thick, rigid base and tends to cost a little less on large interior jobs, which is why we often use it as the base coat and finish it with a polyaspartic topcoat. Polyaspartic wins when you need the floor back quickly, when it sees direct sun, or when we are working in the cold. On a home garage where the owner wants to park on it the next day, polyaspartic is usually the better call. We walk through both options during the estimate and recommend the one that fits the space and your schedule.

Durability and Maintenance

A polyaspartic floor installed over properly prepped concrete will hold up to hot tires, dropped tools, road salt, and most household and shop chemicals, and garage installations carry a 15 year warranty against peeling and delamination, with 3 years on commercial floors. The surface is nonporous, so spills sit on top instead of soaking in, and cleaning is usually a dust mop and the occasional wash with a mild cleaner. The flake finish hides dust and small imperfections between cleanings, which is part of why it stays popular for garages and showrooms. If a section ever takes heavy damage, we can recoat it without tearing out the whole floor.

Frequently Asked Questions

How long before I can use the floor? Most polyaspartic floors take foot traffic within a few hours and vehicle traffic the next day. We confirm the exact timing for your job based on the temperature and the system we install. Can you install it in winter? Yes. Polyaspartic cures across a wide temperature range, so we install it through the Vancouver winter in garages and parkades that stay cold. Will it turn yellow in the sun? No. Polyaspartic is UV stable, which makes it a good fit for patios, entryways, and garages that get direct light. What does a polyaspartic floor cost? Pricing depends on the square footage, the condition of the concrete, and whether you want a flake or solid finish. Call us at (778) 653-8356 and we will give you a free estimate after looking at the space.