Concrete Polishing

Warehouse Floor Polishing in Vancouver

Polished Concrete for Warehouses and Distribution Centres

Epoxy Experts polishes warehouse and distribution centre floors across Metro Vancouver. Warehouse slabs take forklift wheels, pallet jacks and constant turning, which is exactly the kind of traffic that wears through a thin coating. A densified and polished slab has no coating to wear through, so the floor stays intact in the aisles and at the dock doors. This page covers what matters for warehouse floors specifically. For finishes and the full process, see our concrete polishing page.

At a glance

Price$5 to $20 per sq ft, by grit level
Typical finishHoned or satin for traction
Install time1 to 5 days, by floor size
Foot traffic24 hours after the guard or sealer

CONTACT US TODAY!

Built for the aisles

Why Polished Concrete Suits Warehouses

Forklift traffic

Hard plastic and polyurethane forklift wheels scuff and lift coatings at turning points. A densified slab has no film to lift.

Dust control

Untreated concrete dusts as it wears, and that dust settles on product and racking. Densifying hardens the surface and stops the dusting.

Easy cleaning

Auto scrubbers run over a polished floor without catching on chips, peeling edges or worn patches.

Brighter aisles

A satin or polished surface reflects overhead lighting down the racking aisles and across the floor.

Long service life

High traffic lanes can be burnished or lightly repolished in place years later, without closing the building for a full recoat.

Pairs with coatings

Polish the main floor and put a coated system where you need it, such as battery charging rooms, wash bays or striped walkways.

Joints and slab repair

Control Joints, Cracks and Spalls

Control joints are where most warehouse floors fail first. Forklift wheels hit unfilled joints thousands of times a day, and the edges break down into spalls that get wider over time. On warehouse jobs we clean out the joints and fill them with a semi rigid joint filler that flexes with the slab and grinds flush with the surface, so wheels roll across instead of slamming into an open edge.

Cracks are filled or stitched before polishing, and spalled joint edges are rebuilt with a repair compound that polishes along with the rest of the floor. Doing this work as part of the polishing job is far cheaper than chasing joint repairs after the floor is in service.

Choosing a finish

Recommended Finishes for Warehouse Floors

Most common

Honed

A matte, low sheen finish polished to around 400 grit. The best choice where traction matters most, such as loading areas and ramps.

Balanced

Satin

A medium sheen polished to around 800 grit. Brighter aisles with good traction for general warehouse use.

Aggregate

Cream or light salt and pepper

Most warehouse owners keep the grind shallow, which keeps cost down and gives a uniform look across a large floor.

Higher gloss levels are possible, but most warehouses get better value from a honed or satin finish. Our polished concrete vs epoxy comparison covers when a coating makes more sense.

Keeping you running

Phased Work in Live Warehouses

1

Walk the floor

We map racking, dock doors, traffic routes and joint layout with your operations lead.

2

Phase plan

The floor is split into zones so inventory and racking can be shifted while one area at a time is closed.

3

Grind and repair

Grinding with dust extraction, then joint filling and crack repair in each zone.

4

Densify and polish

Lithium silicate densifier and resin polishing to the finish you picked.

5

Guard and reopen

Penetrating guard goes on last, and the zone takes foot traffic 24 hours later.

6

Maintenance handover

We give your team a cleaning sheet with the right scrubber pads and cleaners.

Pricing

Warehouse Floor Polishing Cost

$5 to $20 per sq ft

Most warehouse floors use a honed or satin finish, which keeps them toward the lower part of the range.

What changes a warehouse quote

  • Existing coatings or paint to remove
  • Length of control joints to fill
  • Racking and inventory to work around
  • Phasing and after hours work

You get a fixed price once we have walked the floor.

Need coated zones too? See our warehouse floor coatings page, or our commercial concrete polishing page for other building types.

FAQ

Frequently Asked Questions

Will polished concrete hold up to forklifts?

Yes. Polished concrete is the slab itself, hardened with a densifier, so forklift traffic has no coating to wear through or lift. Joints are filled with a semi rigid filler so wheels roll smoothly across them.

Is a polished warehouse floor slippery?

A clean, dry honed or satin floor gives good traction. Water, oil and dust are what make any floor slippery, so we recommend a honed finish at dock doors and ramps.

How much does warehouse floor polishing cost?

Warehouse polishing runs $5 to $20 per square foot. Most warehouses choose honed or satin finishes, which sit toward the lower end, and joint repair and phasing affect the final price.

Can you polish around racking?

We can work around racking that cannot move and plan phases so racking can be shifted zone by zone. We sort this out at the site visit.

Do you fill control joints?

Yes. Joint filling with a semi rigid filler is part of our warehouse polishing jobs, because unfilled joints are where warehouse floors break down first.

Service area

Serving Metro Vancouver

Our crews work across Metro Vancouver and the Lower Mainland, with night and weekend scheduling available for commercial work.

VancouverBurnabyRichmondSurreyCoquitlamPort CoquitlamNew WestminsterNorth VancouverWest VancouverDeltaLangley

Get a Warehouse Floor Quote

Send us the address, the floor area and a rough idea of your racking and traffic layout. We will walk the floor and give you a fixed price with a phased schedule.